Automotive Atmosphere Lamp Mold-Products-Moldfactory (Taicang) Co., Ltd.

Atmosphere Lamp Features and Development Trend
Automotive atmosphere lamp parts including light guide, light guide mounting bracket, light guide base and other parts. There are mounted in the concealed area inside the car, thin and long are their characteristics, also with optical requirements. At present, atmosphere lamp products are applied in some high-end automotive industry.

Atmosphere Lamp Mold
As the products are thin and long, the solution planning before mold developing is particularly important. For light guide mold, the most important is to avoid the light leakage of light guide parts.

Atmosphere Lamp Exploded View

Common Materials:

5.1 Mold of Atmosphere Lamp Light Guide Successful Case Part Case：Atmosphere Lamp Light Guide Part Material：PMMA Mold Size：800mm×520mm×551mm Part Size：433mm×33mm×53mm Mold Weight：1.35Tons

	Mold Features of Atmosphere Lamp Light Guide: The machining method of the pattern on mold is according to the products requirement. Normally the mold is inverted and use valve needle gate. It should be very careful to disassemble the inserts to avoid the light leakage of light guide.

	Products Features of Atmosphere Lamp Light Guide: Material is normally PMMA. Restricted by space, the light guide part wall thickness is only around 4mm, long is about 400mm. Thin and long are the products characteristics.

5.2 Mold of Atmosphere Lamp Light Guide Bracket Successful Case Part Case：Atmosphere Lamp Light Guide Bracket Part Material：PC+ABS Mold Size：560mm×700mm×576mm Part Size：459mm×43mm×62mma Mold Weight：1.52 Tons

	Mold Features of Atmosphere Lamp Light Guide Bracket: The light guide bracket products usually have small wall thickness, multiple gates injection is often used. Mold thickness should be paid attention to when mold design. Big mold with small product is the feature of the light guide bracket.

	Products Features of Atmosphere Lamp Light Guide Bracket: Material usually PC+ABS or ASA. Restricted by space, the product wall thickness is only around 1.2mm. The light guide mounting groove is smooth and burr-free. Angles are mounted on the product outside.